МС 1510 BLUE HIGH-TEMPERATURE GREASE
Multi-purpose Еxtreme Рressure (EP) grease based on complex lithium thickener. The grease is designed for long-term service in heavy-duty units and bearings. Possesses high anti-friction and anti-oxidative properties.
МС 1510 grease is designed for wide application range, including automobile, non-road, industrial and marine engineering sectors. In particular, it is recommended for chassis components, cardan shafts, spherical joints, and heavy-duty hub bearings exposed to extreme mechanical and thermal loads.
| Color | blue | visually |
| Appearance | homogeneous ointment | visually |
| Type of thickener | Li-Complex | - |
| Base oil kinematic viscosity at 40 °C, cSt | 60-80 | ISO 3104 |
| Dropping point °С, not less than | 350 | ASTM D 2265 |
| NLGI consistency grade | 2/3 | - |
| Penetration at 25 °C, 1/10 mm | 250-280 | ASTM D 217 |
| Oil separation, %, not more than | 13 | GOST 7142 |
| Water washout (from bearing) at +79 °С, %, not more than | 4,0 | ASTM D1264 |
| Resistance to water spray at plus 38 °С, not more than | 7,0 | ASTM D4049 |
| Low-temperature torque of grease-lubricated wheel bearing at minus 40 °С, Nm, not more than | 7,0 | ASTM D4693 |
| Minimum application temperature in automated centralized lubrication systems, °С | + 5 | - |
| Accelerated metal corrosion test | passes | GOST 9.080 |
| Weld point, kgf, not less than | 299 | ASTM D 2596 |
| Last nonseizure load, kgf, not less than | 94 | ASTM D 2783 |
| Scar diameter (392 N,1 hour) not more than, mm | 0,6 | ASTM D 2266 |